Systems - Framed Glass Balustrade

Bondloc 638 Adhesive

Adhesive is required to bond elbows / brackets into stainless steel tube.

• B638 Retainer is designed to give High Strength Retention under Cyclic loading. B638 will retain its full strength and not suffer fatigue under load stress. B638 is a cylindrical parts supplement, suited to Structural components such as cylindrical parts under dynamic load, keys, splines, even structural tubing with close tolerance fit.
• For optimal bonding. parts should be cleaned and degreased
• At temperatures below + 5 Celsius, an activator should be used 

Stainless steel handrail bracket 

• These bond into posts using adhesive and bolt into handrail using 2 x M5 bolts 
• This will suit a 48.3 mm diameter post and handrail
• Supplied with 2 x M5 (x 20 mm) stainless steel bolts 
• Handrail will need to be drilled / tapped to suit bolts
• Available in Grade 304 or Grade 316
• Available in Satin or Mirror Polished 
• H Dimension = 80 mm 
• Part Number: wps.014.04.04.TF
• Image 4 shows typical installation of similar product

• Suitable for fixing handrail to wall or flat surface
• Wall fixing screws not supplied
• Satin polished finish
• Available to suit 42 or 48 mm diameter tube in both Grade 304 and 316

• Stainless steel cover plate
• Suitable for 42.4 or 48.3 mm Diameter stainless steel tube
• Available in Grade 304 and Grade 316
• Available in Satin and Mirror polished finish
• Dimensions - 105 mm diameter - 25 mm High (To suit 42.4 or 48.3 mm post)

• 48.3mm diameter (2.5mm wall thickness) stainless steel handrail tube - we can cut to size
• This size is suitable to match balustrade posts

10 mm toughened clear glass

Suitable for glass balustrades and semi - frameless balustrades 

Polished / rounded edges - 5 mm radius corners

We recommend maximum baluster post spacing's of 1250 mm for semi frameless and glass balustrades

Please contact us if you would like assistance with working out glass sizes

We can supply glass to any size, please contact our sales team for bespoke sizes

Additional Delivery surcharge applies to the following postcodes:

PLEASE CALL US TO ORDER GLASS FOR BELOW POSTCODES 

E, EC, NW, SE, SW, W, WC, WD, (LONDON)

AB,DD,DG,EX,FK,G,IV,KA,KW,KY,M,PA,PH,PL,TD,TQ,TR

BT

Please also note a minimum glass order charge of £150.00 applies - please do not buy single panels of glass on line as these orders will not be processed. 

• 48.3mm diameter (2.5mm wall thickness) stainless steel handrail tube - we can cut to size
• This size is suitable to match balustrade posts

• Flat end cap
• "Hit in" with rubber mallet
• Suitable for either 42.4 (x 2 mm) or 48.3 (x 2.5 mm) stainless steel tube

• 48.3mm diameter (2.5mm wall thickness) stainless steel handrail tube - we can cut to size
• This size is suitable to match balustrade posts
• Mirror polished - recomended for use in coastal / swimming pool locations

• Stainless steel "weld- on" base plate
• Suitable for 42.4 or 48.3 mm Diameter stainless steel tube
• Available in Grade 304 and Grade 316
• Please note bases now have four fixing holes (not two as image)

Stainless steel glass clamp - Round back, designed to be fixed to round balustrade posts.

Clamps hold 10 mm glass

Glass is secured with rubber inlays and optional safety pin

(safety pin required where fall risk)

Please view table for possible glass widths

Stainless steel handrail bracket 

• These bond into posts using adhesive and bolt into handrail using 2 x M5 bolts 
• This will suit a 48.3 mm diameter post and handrail
• Supplied with 2 x M5 (x 20 mm) stainless steel bolts 
• Handrail or 90 Degree elbow will need to be drilled / tapped to suit bolts
• Combine with rounded elbow (200 series) in 48.3 mm diameter if creating balustrade
• Available in Grade 304 or Grade 316
• Available in Satin or Mirror Polished 
• H Dimension = 80 mm
• Part number - wps.014.04.04.TF 
• Image 4 shows typical installation of similar product

Tygris Stainless Steel Cleaner R258

400ml

Non abrasive cleaner, leaving a protective film

• Stainless steel 3 way corner elbow
• Combine with 42.4 and 48.3mm diameter stainless steel tube
• Bonds into tube using adhesive
• H Dimension - 42.4 mm = 30 mm / 48.3 mm = 35 mm

• Stainless steel end scroll - to suit 42.4 (x 2 mm wall thickness) or 48.3 mm (2.5 mm wall thickness) stainless steel tube
• Used to finish handrail (normally at bottom of stairs or ramp)
• Bonds into tube using adhesive
• H dimension - 42 mm = 81 mm / 48 mm = 84 mm 

• Stainless steel "90 Degree" fully rounded elbow
• To suit 42.4 (x 2 mm ) or 48.3 mm (x 2.5 mm) stainless steel tube
• Used to change direction of handrail
• Bonds into tube using adhesive
• H Dimension - 42.4 mm = 30 mm / 48.3 mm = 35 mm

Stainless steel handrail bracket 

• These bond into posts using adhesive and bolt into handrail using 1 x M8 bolt 
• This will suit a 48.3 mm diameter post and handrail
• Handrail will need to be drilled / tapped to suit bolt
• Available in Grade 304 or Grade 316
• Available in Satin or Mirror Polished 
• Part Number: wps.014.04.04.TR
• Image 4 shows typical installation of similar product

10 mm toughened "Etched" glass

Frosted effect for privacy

Suitable for glass balustrades and semi - frameless balustrades 

Polished / rounded edges - 5 mm radius corners

We recommend maximum baluster post spacing's of 1250 mm 

Please contact us if you would like assistance with working out glass sizes

Additional Delivery surcharge applies to the following postcodes:

PLEASE CALL US TO ORDER GLASS FOR BELOW POSTCODES 

E, EC, NW, SE, SW, W, WC, WD, (LONDON)

AB,DD,DG,EX,FK,G,IV,KA,KW,KY,M,PA,PH,PL,TD,TQ,TR

BT

Please also note a minimum glass order charge of £150.00 applies - please do not buy single panels of glass on line as these orders will not be processed.