Glass Clamps

Stainless steel glass clamp - Flat back, designed to be fixed to flat surfaces such as walls or timber newel posts.

Clamps hold 10 mm glass

Glass is secured with rubber inlays and optional safety pin

(safety pin required where fall risk)

Please view table for possible glass widths

Glass clamp can be mounted to Flat surface

Clamps hold 10 mm glass

Glass is secured with rubber inlays and optional safety pin (safety pin required where fall risk)

"Mini type" - 50 x 40 x 26mm

Ideal for restaurant and retail counters  

Corner "Glass to Glass" stainless steel glass clamp

Clamps hold 10 mm glass

Glass is secured with rubber inlays and safety pins

Stainless steel glass holder, 50 mm diameter to suit various glass sizes

Ideal to create glass balustrades on staircases.

• Hole required in glass (20 mm diameter)
• Designed for mounting to flat surface with Supplied M10 bolt
• Satin Polished
• Rubber washers supplied
• Part number - WPS.050.01.04.GH
• Requires a "C" spanner to tighten

Stainless steel glass clamp - Round back, designed to be fixed to round balustrade posts.

Clamps hold 10 mm glass

Glass is secured with rubber inlays and optional safety pin

(safety pin required where fall risk)

Please view table for possible glass widths

Stainless steel glass holder, 30 mm diameter to suit various glass sizes

Ideal to create glass balustrades on staircases.

• Hole required in glass (15 mm diameter)
• Designed for mounting to flat surface with Supplied M8 bolt
• Satin Polished
• Rubber washers supplied
• Part number - WPS.030.01.04.GH
• Requires a "C" spanner to tighten

Stainless steel glass holder, 50 mm diameter to suit various glass sizes

Ideal to create glass balustrades on staircases.

• Hole required in glass (20 mm diameter)
• Designed for mounting to flat surface with Supplied M10 bolt
• Satin Polished- Grade 316 stainless steel
• Rubber washers supplied
• Requires a "C" spanner to tighten
• Various standoffs available, choose from drop down menu

Stainless steel glass holder, 50 mm diameter to suit various glass sizes

Ideal to create glass balustrades on staircases.

• Hole required in glass (20 mm diameter)
• Designed for mounting to flat surface with Supplied M10 bolt
• Satin Polished
• Rubber washers supplied
• Part number - WPS.050.01.04.GH
• Requires a "C" spanner to tighten
• Various standoffs available, choose from drop down menu

• Satin-finish, 316-grade stainless steel
• Suitable for glass between 9.52 mm and 17.52 mm thick
• Ideal for partition walls and wind screens 
• Easy installation from inside the railing
• Flat connections for attachment to square posts or walls

• Satin-finish, 316-grade stainless steel
• Suitable for glass between 19 mm and 21.52 mm thick
• Ideal for partition walls and wind screens 
• Easy installation from inside the railing
• Flat connections for attachment to square posts or walls

Square stainless steel glass clamp

Clamps hold 10 mm glass

Glass is secured with rubber inlays and optional safety pin

Square glass clamps also come supplied with safety plate 

Model 6000 Q railing® Easy Glass ® system

• Ideal solution for creating glass screens and fencing
• Quick, easy and stylish solution 
• Grade 316 stainless steel
• Satin Polished
• Glass can be used with or without safety pin with this model 
• Suitable for various glass sizes - select size when ordering 

This model has been designed as a guidance system in the form of partitions, dividers, boundaries or windbreak. This product has not been designed for fall protection and will not comply with building regulations for fall protection use.

Model 6400 Q railing® Easy Glass ® system

• Quick, easy and stylish solution 
• Grade 316 stainless steel - satin polished
• Suitable for various glass sizes - select size when ordering 
• Tested to comply with BS 6180 (2011) - check test report for details (full test report available on request)
• Click here to see installation video